Setelah config dengan serial, bias telnet lewat IP sbb :
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.11.26 09:42:10 =~=~=~=~=~=~=~=~=~=~=~=
sntstorage> qtree
qtree: This command is deprecated; using qtree status.
Volume Tree Style Oplocks Status
-------- -------- ----- -------- ---------
vol0 unix enabled normal
vol_mbx_bod unix enabled normal
vol_mbx_bod q_mbx_bod unix enabled normal
vol_mbx_common unix enabled normal
vol_mbx_common q_mbx_common unix enabled normal
vol_log unix enabled normal
vol_log q_log unix enabled normal
vol_journal unix enabled normal
vol_journal q_journal unix enabled normal
sntstorage> lun create -s 1t -t windows /vol/vol_mbx_bod/q_mbx_bod/mbxbod
lun create: created a LUN of size: 1.0t (1099604782080)
sntstorage> lun create -s 1t -t windows /vol/vol_mbx_common/q_mbx_common/mbxcommon
lun create: created a LUN of size: 1.0t (1099604782080)
sntstorage> lun create -s 250g -t windows /vol/vol_journal/q_journal/journal
lun create: created a LUN of size: 250.0g (268473139200)
sntstorage> lun create -s 250g -t windows /vol/vol_log/q_log/log
lun create: created a LUN of size: 250.0g (268473139200)
sntstorage> lun show
/vol/vol_journal/q_journal/journal 250.0g (268473139200) (r/w, online)
/vol/vol_log/q_log/log 250.0g (268473139200) (r/w, online)
/vol/vol_mbx_bod/q_mbx_bod/mbxbod 1.0t (1099604782080) (r/w, online)
/vol/vol_mbx_common/q_mbx_common/mbxcommon 1.0t (1099604782080) (r/w, online)
sntstorage> qtree
qtree: This command is deprecated; using qtree status.
Volume Tree Style Oplocks Status
-------- -------- ----- -------- ---------
vol0 unix enabled normal
vol_mbx_bod unix enabled normal
vol_mbx_bod q_mbx_bod unix enabled normal
vol_mbx_common unix enabled normal
vol_mbx_common q_mbx_common unix enabled normal
vol_log unix enabled normal
vol_log q_log unix enabled normal
vol_journal unix enabled normal
vol_journal q_journal unix enabled normal
sntstorage> vol status
Volume State Status Options
vol0 online raid_dp, flex root
64-bit
vol_mbx_bod online raid_dp, flex nosnap=on, create_ucode=on, convert_ucode=on,
64-bit no_i2p=on, fractional_reserve=0
vol_mbx_common online raid_dp, flex nosnap=on, create_ucode=on, convert_ucode=on,
64-bit no_i2p=on, fractional_reserve=0
vol_log online raid_dp, flex nosnap=on, create_ucode=on, convert_ucode=on,
64-bit no_i2p=on, fractional_reserve=0
vol_journal online raid_dp, flex nosnap=on, create_ucode=on, convert_ucode=on,
64-bit no_i2p=on, fractional_reserve=0
sntstorage> aggr status
Aggr State Status Options
aggr0 online raid_dp, aggr root
64-bit
aggr1 online raid_dp, aggr nosnap=on
64-bit
sntstorage> cf enable
cf: clustering already enabled
sntstorage> fcp start
fcp: No FCP Target Adapters are present in this system.
sntstorage> fcadmin config
Local
Adapter Type State Status
---------------------------------------------------
1a initiator CONFIGURED. online
1b initiator CONFIGURED. offline
sntstorage> fcadmin config -t target 1a
A reboot is required for the new adapter configuration to take effect.
sntstorage> fcadmin config -t target 1b
A reboot is required for the new adapter configuration to take effect.
sntstorage> reboot
sntstorage> fcadmin config
Local
Adapter Type State Status
---------------------------------------------------
1a target CONFIGURED offline
1b target CONFIGURED offline
sntstorage> fcp start
sntstorage> fcadmin config
Local
Adapter Type State Status
---------------------------------------------------
1a target CONFIGURED online
1b target CONFIGURED online
sntstorage> sysconfig -r
Aggregate aggr0 (online, raid_dp) (block checksums)
Plex /aggr0/plex0 (online, normal, active, pool0)
RAID group /aggr0/plex0/rg0 (normal, block checksums)
RAID Disk Device HA SHELF BAY CHAN Pool Type RPM Used (MB/blks) Phys (MB/blks)
--------- ------ ------------- ---- ---- ---- ----- -------------- --------------
dparity 0a.00.0 0a 0 0 SA:A 0 SAS 10000 560000/1146880000 572325/1172123568
parity 0a.00.2 0a 0 2 SA:A 0 SAS 10000 560000/1146880000 572325/1172123568
data 0a.00.4 0a 0 4 SA:A 0 SAS 10000 560000/1146880000 572325/1172123568
Aggregate aggr1 (online, raid_dp) (block checksums)
Plex /aggr1/plex0 (online, normal, active, pool0)
RAID group /aggr1/plex0/rg0 (normal, block checksums)
RAID Disk Device HA SHELF BAY CHAN Pool Type RPM Used (MB/blks) Phys (MB/blks)
--------- ------ ------------- ---- ---- ---- ----- -------------- --------------
dparity 0a.00.22 0a 0 22 SA:A 0 SAS 10000 560000/1146880000 572325/1172123568
parity 0a.00.18 0a 0 18 SA:A 0 SAS 10000 560000/1146880000 572325/1172123568
data 0a.00.20 0a 0 20 SA:A 0 SAS 10000 560000/1146880000 572325/1172123568
data 0a.00.6 0a 0 6 SA:A 0 SAS 10000 560000/1146880000 572325/1172123568
data 0a.00.14 0a 0 14 SA:A 0 SAS 10000 560000/1146880000 572325/1172123568
data 0a.00.16 0a 0 16 SA:A 0 SAS 10000 560000/1146880000 572325/1172123568
data 0a.00.10 0a 0 10 SA:A 0 SAS 10000 560000/1146880000 572325/1172123568
data 0a.00.12 0a 0 12 SA:A 0 SAS 10000 560000/1146880000 572325/1172123568
Pool1 spare disks (empty)
Pool0 spare disks
RAID Disk Device HA SHELF BAY CHAN Pool Type RPM Used (MB/blks) Phys (MB/blks)
--------- ------ ------------- ---- ---- ---- ----- -------------- --------------
Spare disks for block checksum
spare 0a.00.8 0a 0 8 SA:A 0 SAS 10000 560000/1146880000 572325/1172123568
Partner disks
RAID Disk Device HA SHELF BAY CHAN Pool Type RPM Used (MB/blks) Phys (MB/blks)
--------- ------ ------------- ---- ---- ---- ----- -------------- --------------
partner 0a.00.15 0a 0 15 SA:A 0 SAS 10000 0/0 572325/1172123568
partner 0a.00.23 0a 0 23 SA:A 0 SAS 10000 0/0 572325/1172123568
partner 0a.00.21 0a 0 21 SA:A 0 SAS 10000 0/0 572325/1172123568
partner 0a.00.19 0a 0 19 SA:A 0 SAS 10000 0/0 572325/1172123568
partner 0a.00.17 0a 0 17 SA:A 0 SAS 10000 0/0 572325/1172123568
partner 0a.00.13 0a 0 13 SA:A 0 SAS 10000 0/0 572325/1172123568
partner 0a.00.11 0a 0 11 SA:A 0 SAS 10000 0/0 572325/1172123568
partner 0a.00.9 0a 0 9 SA:A 0 SAS 10000 0/0 572325/1172123568
partner 0a.00.7 0a 0 7 SA:A 0 SAS 10000 0/0 572325/1172123568
partner 0a.00.5 0a 0 5 SA:A 0 SAS 10000 0/0 572325/1172123568
partner 0a.00.3 0a 0 3 SA:A 0 SAS 10000 0/0 572325/1172123568
partner 0a.00.1 0a 0 1 SA:A 0 SAS 10000 0/0 572325/1172123568
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.11.26 09:51:00 =~=~=~=~=~=~=~=~=~=~=~=
login as: root
root@172.16.32.59's password:
sntstorage2> qtree create /vol/vol_mbx_bod/q_mbx_bod
sntstorage2> qtree create /vol/vol_mbx_common/q_mbx_common
sntstorage2> qtree create /vol/vol_log/q_log
sntstorage2> qtree create /vol/vol_journal/q_journal
sntstorage2> qtree
qtree: This command is deprecated; using qtree status.
Volume Tree Style Oplocks Status
-------- -------- ----- -------- ---------
vol0 unix enabled normal
vol_mbx_bod unix enabled normal
vol_mbx_bod q_mbx_bod unix enabled normal
vol_mbx_common unix enabled normal
vol_mbx_common q_mbx_common unix enabled normal
vol_log unix enabled normal
vol_log q_log unix enabled normal
vol_journal unix enabled normal
vol_journal q_journal unix enabled normal
sntstorage2> lun create -s 1t -t windows /vol/vol_mbx_common/q_common/mbxcommon
lun create: created a LUN of size: 1.0t (1099604782080)
sntstorage2> lun create -s 250g -t windows /vol/vol_log/q_log/log
lun create: created a LUN of size: 250.0g (268473139200)
sntstorage2> lun create -s 250g -t windows /vol/vol_journal/q_journal/journal
lun create: created a LUN of size: 250.0g (268473139200)
sntstorage2> sysconfig -r
Aggregate aggr1 (online, raid_dp) (block checksums)
Plex /aggr1/plex0 (online, normal, active, pool0)
RAID group /aggr1/plex0/rg0 (normal, block checksums)
RAID Disk Device HA SHELF BAY CHAN Pool Type RPM Used (MB/blks) Phys (MB/blks)
--------- ------ ------------- ---- ---- ---- ----- -------------- --------------
dparity 0a.00.9 0a 0 9 SA:B 0 SAS 10000 560000/1146880000 572325/1172123568
parity 0a.00.17 0a 0 17 SA:B 0 SAS 10000 560000/1146880000 572325/1172123568
data 0a.00.23 0a 0 23 SA:B 0 SAS 10000 560000/1146880000 572325/1172123568
data 0a.00.11 0a 0 11 SA:B 0 SAS 10000 560000/1146880000 572325/1172123568
data 0a.00.13 0a 0 13 SA:B 0 SAS 10000 560000/1146880000 572325/1172123568
data 0a.00.15 0a 0 15 SA:B 0 SAS 10000 560000/1146880000 572325/1172123568
data 0a.00.7 0a 0 7 SA:B 0 SAS 10000 560000/1146880000 572325/1172123568
data 0a.00.21 0a 0 21 SA:B 0 SAS 10000 560000/1146880000 572325/1172123568
Aggregate aggr0 (online, raid_dp) (block checksums)
Plex /aggr0/plex0 (online, normal, active, pool0)
RAID group /aggr0/plex0/rg0 (normal, block checksums)
RAID Disk Device HA SHELF BAY CHAN Pool Type RPM Used (MB/blks) Phys (MB/blks)
--------- ------ ------------- ---- ---- ---- ----- -------------- --------------
dparity 0a.00.1 0a 0 1 SA:B 0 SAS 10000 560000/1146880000 572325/1172123568
parity 0a.00.3 0a 0 3 SA:B 0 SAS 10000 560000/1146880000 572325/1172123568
data 0a.00.5 0a 0 5 SA:B 0 SAS 10000 560000/1146880000 572325/1172123568
Pool1 spare disks (empty)
Pool0 spare disks
RAID Disk Device HA SHELF BAY CHAN Pool Type RPM Used (MB/blks) Phys (MB/blks)
--------- ------ ------------- ---- ---- ---- ----- -------------- --------------
Spare disks for block checksum
spare 0a.00.19 0a 0 19 SA:B 0 SAS 10000 560000/1146880000 572325/1172123568
Partner disks
RAID Disk Device HA SHELF BAY CHAN Pool Type RPM Used (MB/blks) Phys (MB/blks)
--------- ------ ------------- ---- ---- ---- ----- -------------- --------------
partner 0a.00.2 0a 0 2 SA:B 0 SAS 10000 0/0 572325/1172123568
partner 0a.00.0 0a 0 0 SA:B 0 SAS 10000 0/0 572325/1172123568
partner 0a.00.10 0a 0 10 SA:B 0 SAS 10000 0/0 572325/1172123568
partner 0a.00.12 0a 0 12 SA:B 0 SAS 10000 0/0 572325/1172123568
partner 0a.00.14 0a 0 14 SA:B 0 SAS 10000 0/0 572325/1172123568
partner 0a.00.22 0a 0 22 SA:B 0 SAS 10000 0/0 572325/1172123568
partner 0a.00.16 0a 0 16 SA:B 0 SAS 10000 0/0 572325/1172123568
partner 0a.00.4 0a 0 4 SA:B 0 SAS 10000 0/0 572325/1172123568
partner 0a.00.6 0a 0 6 SA:B 0 SAS 10000 0/0 572325/1172123568
partner 0a.00.20 0a 0 20 SA:B 0 SAS 10000 0/0 572325/1172123568
partner 0a.00.18 0a 0 18 SA:B 0 SAS 10000 0/0 572325/1172123568
partner 0a.00.8 0a 0 8 SA:B 0 SAS 10000 0/0 572325/1172123568
sntstorage2> sysconfig -a
NetApp Release 8.1.2 7-Mode: Tue Oct 30 19:56:51 PDT 2012
System ID: 1234567890 (XXXXXXX); partner ID: 10987654321 (YYYYYYY)
System Serial Number: 940000496899 (sntstorage2)
System Rev: D1
System Storage Configuration: Single-Path HA
System ACP Connectivity: Partial Connectivity
slot 0: System Board 1.7 GHz (System Board XIX D1)
Model Name: FAS2240-2
Part Number: 111-00846
Revision: D1
Serial Number: *********
BIOS version: 8.1.0
Loader version: 4.1
Processors: 4
Processor ID: 0x106e4
Microcode Version: 0xffff0002
Processor type: Intel(R) Xeon(R) CPU C3528 @ 1.73GHz
Memory Size: 6144 MB
Memory Attributes: Hoisting
Normal ECC
NVMEM Size: 768 MB of Main Memory Used
CMOS RAM Status: OK
Controller: B
Service Processor Status: Online
Firmware Version: 2.1.2
Mgmt MAC Address: 00:A0:98:3F:F7:7A
Ethernet Link: up, 100Mb, full duplex, auto-neg complete
Using DHCP: no
IPv4 configuration:
IP Address: 192.168.1.115
Netmask: 255.255.255.0
Gateway: 192.168.1.1
IPv6 configuration: Disabled
slot 0: Internal 10/100 Ethernet Controller
e0M MAC Address: 00:a0:98:3f:f7:79 (auto-100tx-fd-up)
e0P MAC Address: 00:a0:98:3f:f7:78 (auto-100tx-fd-up)
Device Type: Rev 0
memory mapped I/O base 0x00000000dfa00000, size 0x20000
I/O base 0x0000000000003000, size 0x20
memory mapped I/O base 0x00000000dfa20000, size 0x4000
memory mapped I/O base 0x00000000dfb20000, size 0x20000
I/O base 0x0000000000004000, size 0x20
memory mapped I/O base 0x00000000dfb00000, size 0x4000
slot 0: Quad Gigabit Ethernet Controller 82580
e0a MAC Address: 00:a0:98:3f:f7:74 (auto-unknown-down)
e0b MAC Address: 00:a0:98:3f:f7:75 (auto-unknown-down)
e0c MAC Address: 00:a0:98:3f:f7:76 (auto-unknown-down)
e0d MAC Address: 00:a0:98:3f:f7:77 (auto-unknown-down)
Device Type: 150E
memory mapped I/O base 0x00000000df700000, size 0x80000
I/O base 0x0000000000002040, size 0x20
memory mapped I/O base 0x00000000df808000, size 0x4000
memory mapped I/O base 0x00000000df780000, size 0x80000
I/O base 0x0000000000002060, size 0x20
memory mapped I/O base 0x00000000df80c000, size 0x4000
memory mapped I/O base 0x00000000df600000, size 0x80000
I/O base 0x0000000000002000, size 0x20
memory mapped I/O base 0x00000000df800000, size 0x4000
memory mapped I/O base 0x00000000df680000, size 0x80000
I/O base 0x0000000000002020, size 0x20
memory mapped I/O base 0x00000000df804000, size 0x4000
slot 0: Interconnect HBA: Mellanox IB MT25204
GUID: 0x100000a0983ff774 LID: 0x5 Remote LID: 0x4
Firmware rev: 1.0.800
Hardware rev: 160
Command rev: 1
Cluster Interconnect Port: 4x
memory mapped I/O base 0xdf400000, size 0x100000
prefetchable memory base 0xde800000, size 0x800000
slot 0: SAS Host Adapter 0a (PMC-Sierra PM8001 rev. C, SAS, <UP>)
Firmware rev: 01.11.00.00
Base WWN: 5:00a098:0018d42:70
Phy State: [0] Enabled, 6.0 Gb/s
[1] Enabled, 6.0 Gb/s
[2] Enabled, 6.0 Gb/s
[3] Enabled, 6.0 Gb/s
00.0 : NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KNH9VLAF)
00.1 : NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KNHKTL1F)
00.2 : NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KNHMU1RF)
00.3 : NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KNHL820F)
00.4 : NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KNVYRMMF)
00.5 : NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KNH2SH4F)
00.6 : NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KNVZ2APF)
00.7 : NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KNVUYXPF)
00.8 : NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KNH3EYKF)
00.9 : NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KNH9T51F)
00.10: NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KNVZ28XF)
00.11: NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KNHA9TKF)
00.12: NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KNHMWKDF)
00.13: NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KNHJ23HF)
00.14: NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KNHMUTPF)
00.15: NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KNHMUPRF)
00.16: NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KNH9T08F)
00.17: NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KNH9T0RF)
00.18: NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KNVZ365F)
00.19: NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KNHLL6TF)
00.20: NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KNHA9K8F)
00.21: NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KNHMSP1F)
00.22: NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KNHL7TUF)
00.23: NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KNHAAMZF)
Shelf 0: IOM6E Firmware rev. IOM6E A: 0121 IOM6E B: 0121
slot 0: SAS Host Adapter 0b (PMC-Sierra PM8001 rev. C, SAS, <OFFLINE (hard)>)
Firmware rev: 01.11.00.00
Base WWN: 5:00a098:0018d42:74
Phy State: [4] Disabled
[5] Disabled
[6] Disabled
[7] Disabled
QSFP Vendor: not available
QSFP Part Number: not available
QSFP Type: not available
QSFP Serial Number: not available
memory mapped I/O base 0xdf530000, size 0x10000
memory mapped I/O base 0xdf520000, size 0x10000
memory mapped I/O base 0x00000000df510000, size 0x10000
memory mapped I/O base 0x00000000df500000, size 0x10000
slot 0: Intel ICH USB EHCI Adapter u0a (0xdf101000)
boot0 Micron Technology Real SSD eUSB 2GB, class 0/0, rev 2.00/11.10, addr 2 1936MB 512B/sect (B9F0022700106385)
memory-mapped I/O base 0xdf101000, size 0x400
slot 1: FC Host Adapter 1a (QLogic 2532 rev. 2, N-port, <UP>)
Board name: 111-00811+A2
Serial Number: **********
Firmware rev: 5.4.130
Host Port Id: 0x11000
FC Node Name: 5:00a:098001:b24225
FC Port Name: 5:00a:098001:b24225
SFP Vendor: FINISAR CORP.
SFP Part Number: FTLF8528P2BNV
SFP Serial Number: PNN4G49
SFP Capabilities: 2, 4 or 8 Gbit
Link Data Rate: 4 Gbit
Switch Port: QLOGIC4Gb:16
I/O base 0x00000000ffffff00, size 0x100
memory mapped I/O base 0xdf900000, size 0x4000
slot 1: FC Host Adapter 1b (QLogic 2532 rev. 2, L-port, <OFFLINE (hard)>)
Board name: 111-00811+A2
Serial Number: **********
Firmware rev: 5.4.130
Host Loop Id: 0
FC Node Name: 5:00a:098101:b24225
FC Port Name: 5:00a:098101:b24225
SFP Vendor: FINISAR CORP.
SFP Part Number: FTLF8528P2BNV
SFP Serial Number: PNN4GGL
SFP Capabilities: 2, 4 or 8 Gbit
Link Data Rate: N/A
I/O base 0x00000000ffffff00, size 0x100
memory mapped I/O base 0xdf904000, size 0x4000
sntstorage2> cf enable
cf: clustering already enabled
sntstorage2> storage show adapter
Slot: 0a
Description: SAS Host Adapter 0a (PMC-Sierra PM8001 rev. C)
Firmware Rev: 01.11.00.00
Base WWN: 5:00a098:0018d42:70
State: Enabled
In Use: Yes
Redundant: No
Phy State: [0] Enabled, 6.0Gb/s (10)
[1] Enabled, 6.0Gb/s (10)
[2] Enabled, 6.0Gb/s (10)
[3] Enabled, 6.0Gb/s (10)
Slot: 0b
Description: SAS Host Adapter 0b (PMC-Sierra PM8001 rev. C)
Firmware Rev: 01.11.00.00
Base WWN: 5:00a098:0018d42:74
State: Disabled
In Use: No
Redundant: Yes
Phy State: [0] Disabled (1)
[1] Disabled (1)
[2] Disabled (1)
[3] Disabled (1)
Slot: 1a
Description: Fibre Channel Host Adapter 1a (QLogic 2532 rev. 2)
Firmware Rev: 5.4.130
FC Node Name: 5:00a:098001:b24225
FC Port Name: 5:00a:098001:b24225
FC Packet Size: 2048
Link Data Rate: 4 Gbit
SRAM Parity: Yes
External GBIC: No
State: Enabled
In Use: No
Redundant: Yes
Slot: 1b
Description: Fibre Channel Host Adapter 1b (QLogic 2532 rev. 2)
Firmware Rev: 5.4.130
FC Node Name: 5:00a:098101:b24225
FC Port Name: 5:00a:098101:b24225
FC Packet Size: 2048
Link Data Rate: N/A
SRAM Parity: Yes
External GBIC: No
State: Disabled
In Use: No
Redundant: Yes
sntstorage2> fcadmin config
Local
Adapter Type State Status
---------------------------------------------------
1a initiator CONFIGURED. online
1b initiator CONFIGURED. offline
sntstorage2> fcadmin config -d 1a
sntstorage2> fcadmin config -t target 1a
A reboot is required for the new adapter configuration to take effect.
sntstorage2> fcadmin config -d 1b
sntstorage2> fcadmin config -t target 1b
A reboot is required for the new adapter configuration to take effect.
sntstorage2> fcadmin config
Local
Adapter Type State Status
---------------------------------------------------
1a initiator PENDING (target) offline
1b initiator PENDING (target) offline
sntstorage2> reboot
sntstorage2> fcadmin config
Local
Adapter Type State Status
---------------------------------------------------
1a target CONFIGURED offline
1b target CONFIGURED offline
sntstorage2> fcp status
FCP service is not running.
sntstorage2> fcp start
sntstorage2> fcadmin config
Local
Adapter Type State Status
---------------------------------------------------
1a target CONFIGURED online
1b target CONFIGURED online
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.11.26 14:16:44 =~=~=~=~=~=~=~=~=~=~=~=
igroup show -v
sntstorage2> fcp show adapter
Slot: 1a
Description: Fibre Channel Target Adapter 1a (QLogic 2532 (2562) rev. 2)
Adapter Type: Local
Status: ONLINE
FC Nodename: 50:0a:09:80:81:b6:ae:de (500a098081b6aede)
FC Portname: 50:0a:09:81:91:b6:ae:de (500a098191b6aede)
Standby: No
Slot: 1b
Description: Fibre Channel Target Adapter 1b (QLogic 2532 (2562) rev. 2)
Adapter Type: Local
Status: ONLINE
FC Nodename: 50:0a:09:80:81:b6:ae:de (500a098081b6aede)
FC Portname: 50:0a:09:82:91:b6:ae:de (500a098291b6aede)
Standby: No
sntstorage2> fcpshow initiators
Initiators connected on adapter 1a:
Portname Group
-------- -----
21:00:00:24:ff:4a:a5:e7
Initiators connected on adapter 1b:
Portname Group
-------- -----
21:00:00:24:ff:4a:a5:fe
21:00:00:24:ff:4a:a5:e6
sntstorage2> fcp show initiators
Initiators connected on adapter 1a:
Portname Group
-------- -----
21:00:00:24:ff:4a:a5:e7
Initiators connected on adapter 1b:
Portname Group
-------- -----
21:00:00:24:ff:4a:a5:fe
21:00:00:24:ff:4a:a5:e6
sntstorage2> igroup create -f -t windows mbx1_hosts 210024ff4aa5e6 21000024ff4aa5e7
sntstorage2> igroup show
mbx1_hosts (FCP) (ostype: windows):
21:00:00:24:ff:4a:a5:e6 (logged in on: 1b)
21:00:00:24:ff:4a:a5:e7 (logged in on: 1a)
sntstorage2> lun show
/vol/vol_journal/q_journal/journal 250.0g (268473139200) (r/w, online)
/vol/vol_log/q_log/log 250.0g (268473139200) (r/w, online)
/vol/vol_mbx_bod/q_mbx_bod/mbxbod 1.0t (1099604782080) (r/w, online)
/vol/vol_mbx_common/q_mbx_common/mbxcommon 1.0t (1099604782080) (r/w, online)
sntstorage2> lun map /vol/vol_journal/q_journal/journal mbx1_hosts 0
sntstorage2> lun map /vol/vol_log/q_log/log mbx1_hosts 1
sntstorage2> lun map /vol/vol_mbx_bod/q_mbx_bod/mbxbod mbx1_hosts 2
sntstorage2> lun map /vol/vol_mbx_common/q_mbx_common/mbxcommon mbx1_hosts 3
sntstorage2> fcp show initiators
Initiators connected on adapter 1a:
Portname Group
-------- -----
21:00:00:24:ff:4a:a5:e7 mbx1_hosts
Initiators connected on adapter 1b:
Portname Group
-------- -----
21:00:00:24:ff:4a:a5:e6 mbx1_hosts
21:00:00:24:ff:4a:a5:fe
sntstorage2> igroup show
mbx1_hosts (FCP) (ostype: windows):
21:00:00:24:ff:4a:a5:e6 (logged in on: 1b)
21:00:00:24:ff:4a:a5:e7 (logged in on: 1a)
Rabu, 27 November 2013
Senin, 18 November 2013
Install DiskSelf NetApp
Kondisi :
- Dual Controller
- Masih ada slot SAS kosong minimal dua (tiap controller)
1. Capture semua config dengan #sysconfig -r & #disk show -n & #disk show -a
2. Set off untuk auto.assign #options disk.auto_assign off
3.a. Set ID disk self berbeda dr disk self existing
b. Install SAS kabel (SAS 1a ctlr1 -> Diskself1 atas kiri ; SAS 1a ctrl2 -> Diskself1 bawah kiri
SAS 2a ctrl1 -> Diskself1 bawah kanan ; SAS 2a ctrl2 -> Diskself atas kanan)
4. Cek status disk #disk show -n
contoh hasil :
DISK OWNER POOL SERIAL NUMBER HOME
------------ ------------- ----- ------------- -------------
4a.12.22 Not Owned NONE CZX6AT4L
4a.12.18 Not Owned NONE CZX6AVJL
4a.12.23 Not Owned NONE CZX6AYWL
4a.12.13 Not Owned NONE CZX6B1NL
4a.12.21 Not Owned NONE CZX6AV3L
4a.12.16 Not Owned NONE CZX5NJNL
5. Assign disk to Controller #disk assign 4a.12.22
6. Setelah di-assign disk bias dibuat agregat baru atau di-add ke agregat existing
- Dual Controller
- Masih ada slot SAS kosong minimal dua (tiap controller)
1. Capture semua config dengan #sysconfig -r & #disk show -n & #disk show -a
2. Set off untuk auto.assign #options disk.auto_assign off
3.a. Set ID disk self berbeda dr disk self existing
b. Install SAS kabel (SAS 1a ctlr1 -> Diskself1 atas kiri ; SAS 1a ctrl2 -> Diskself1 bawah kiri
SAS 2a ctrl1 -> Diskself1 bawah kanan ; SAS 2a ctrl2 -> Diskself atas kanan)
4. Cek status disk #disk show -n
contoh hasil :
DISK OWNER POOL SERIAL NUMBER HOME
------------ ------------- ----- ------------- -------------
4a.12.22 Not Owned NONE CZX6AT4L
4a.12.18 Not Owned NONE CZX6AVJL
4a.12.23 Not Owned NONE CZX6AYWL
4a.12.13 Not Owned NONE CZX6B1NL
4a.12.21 Not Owned NONE CZX6AV3L
4a.12.16 Not Owned NONE CZX5NJNL
5. Assign disk to Controller #disk assign 4a.12.22
6. Setelah di-assign disk bias dibuat agregat baru atau di-add ke agregat existing
Mount Snapshot for restore file
Here are the commands to run on the Netapp Controller to take any existing snapshot and create a LUN Clone
1) Optional, create a new snap to be used as the basis of the LUN clone
snap create volume snap_name
2) Create the lun clone, in the same volume as existing lun, using existing snap
lun clone create /vol/volume/clone01 -b /vol/volume/lun01 snap_name
a. If you get the following error lun clone create: No space left on device use the following syntax
lun clone create /vol/volume/clone01 -o noreserve -b /vol/volume/lun01 snap_name
3) Mount the clone to the off-host backup server.
lun map /vol/volume/clone01 backup_igroup #
backup_igroup = the initiator group associated with the backup server.
# = the LUN ID to mount the LUN as
a. You could use SnapDrive to mount the LUN to the off-host backup server, as an alternative.
4) On the backup server rescan your drives
5) Bring the new volume on-line
6) Perform the backup
7) Take the volume off-line
8) Remove the clone from the off-host backup server
lun unmap /vol/volume/clone01 backup_igroup
backup_igroup = the initiator group associated with the backup server
9) Remove the clone
lun destroy /vol/volume/clone01
Langganan:
Postingan (Atom)