Upgrade Ontap 8.2 7-mode ke CDoT 8.3 di mesin Fas2552

Upgrade Ontap 8.2 7-mode ke CDoT 8.3 di mesin Fas2552

1.    Cek status cluster

bs-ctrl2> cf status

Controller Failover enabled, bs-ctrl1 is up.

VIA Interconnect is up (link up).

2.    Jika masih enable dirubah ke disable

bs-ctrl2> cf disable

bs-ctrl2> cf status

Controller Failover disabled.

VIA Interconnect is up (link up).

3.    Shutdown ke LOADER

bs-ctrl2> halt

4.    Run command :

a.      LOADER-B> set-defaults

b.     LOADER-B> setenv bootarg.init.boot_clustered true

c.      LOADER-B> setenv AUTOBOOT false

d.     LOADER-B> setenv AUTOBOOT false

e.      LOADER-B> boot_ontap

5.    Pilih menu ‘Install new software config’

**************************

*                                                     *

* Press Ctrl-C for Boot Menu. *

*                                                     *

************************** 

^CBoot Menu will be available.

Please choose one of the following:

(1) Normal Boot.

(2) Boot without /etc/rc.

(3) Change password.

(4) Clean configuration and initialize all disks.

(5) Maintenance mode boot.

(6) Update flash from backup config.

(7) Install new software first.

(8) Reboot node.

Selection (1-8)? 7

This procedure is not supported for Non-Disruptive Upgrade on an HA pair.

The software will be installed to the alternate image, from which the node is

not currently running. Do you want to continue? {y|n} y

In order to download the package, a temporary network interface needs to be

configured.

Select the network port you want to use for the download (for example, 'e0a')

 e0M

The node needs to reboot for this setting to take effect.  Reboot now? {y|n}

(selecting yes will return you automatically to this install wizard) y

Rebooting...

Here are the permissions on /mroot directory:

drwxr-xr-x  3 root  wheel  512 Oct  8  2014 /mroot

/mroot directory doesn't exist or is it not writeable... aborting coverage dump

Terminated

.

Uptime: 1m46s

System rebooting...

6.    Copy image.tgz (ontap 8.3) via http

LOADER-B> boot_ontap

Loading X86_64/freebsd/image1/kernel:0x100000/9570440 0xa20888/4044560 Entry at 0x8016e330

Loading X86_64/freebsd/image1/platform.ko:0xdfc000/781096 0xf97750/720384 0xebab40/44936 0x1047550/49560 0xec5ac8/108679 0xee034f/80250 0xef3ce0/170336 0x10536e8/193800 0xf1d640/16 0xf1d650/2384 0x1082bf0/7152 0xf1e000/0 0xf1e000/344 0x10847e0/1032 0xf1e158/1944 0x1084be8/5832 0xf1e8f0/1648 0x10862b0/4944 0xf1ef60/240 0x1087600/720 0xf1f060/448 0xf5a8a0/14896 0xf97652/253 0xf5e2d0/135720 0xf7f4f8/98650

Starting program at 0x8016e330

NetApp Data ONTAP 8.2.2P1 Cluster-Mode

Root mount waiting for: usbus0

Root mount waiting for: usbus0

Root mount waiting for: usbus0

Root mount waiting for: usbus0

Copyright (C) 1992-2014 NetApp.

All rights reserved.

md1.uzip: 39168 x 16384 blocks

md2.uzip: 15360 x 16384 blocks

*************************

*                                                     *

* Press Ctrl-C for Boot Menu. *

*                                                     *

************************** 

Proceeding with Install

In order to download the package, a temporary network interface needs to be

configured.

Enter the IP address for port e0M: 172.16.254.101

Enter the netmask for port e0M: 255.255.255.0

Enter IP address of default gateway: 172.16.254.1

What is the URL for the package? http://172.16.254.99/images/83P2_q_image.tgz

What is the user name on "172.16.254.99", if any?

Checking network link... -

Checking network link... /

 Checking network link... success.

Checking route to host "172.16.254.99"... success.

Attempting to reach 172.16.254.99... success.

Looking up URL "http://172.16.254.99/images/83P2_q_image.tgz"... success.

Downloading package...   0%

Downloading package...   1%

          …

Checking package contents... success.

Extracting install script from package... success.

Invoking script (validation phase).

INSTALL running in check-only mode: the image will be validated only

Mode of operation is COPY

Current image is image1

Alternate image is image2

Package MD5 checksums pass

Available space on boot device is 1560 MB

Required  space on boot device is 507 MB

Kernel binary matches install machine type

Terminated

Invoking script (install phase).  This may take up to 20 minutes.

Mode of operation is COPY

Current image is image1

Alternate image is image2

Package MD5 checksums pass

Available space on boot device is 1560 MB

Required  space on boot device is 507 MB

Kernel binary matches install machine type

Getting ready to install image

Syncing device...

Extracting to /cfcard/x86_64/freebsd/image2...

Installed MD5 checksums pass

Installing diagnostic and firmware files

Firmware MD5 checksums pass

Terminated

Installation complete.

Do you want to set the newly installed software as the default to be used for

subsequent reboots? {y|n} y

The node must be rebooted to start using the newly installed software. Do you

want to reboot now? {y|n} y

Rebooting...

7.    Install CDoT 8.3

*******************************

*                             *

* Press Ctrl-C for Boot Menu. *

*                             *

******************************* 

Running the upgrade system

bootarg.upgrade="true"

bootarg.from.version="8.2.2P1"

^CBoot Menu will be available.

Please choose one of the following:

(1) Normal Boot.

(2) Boot without /etc/rc.

(3) Change password.

(4) Clean configuration and initialize all disks.

(5) Maintenance mode boot.

(6) Update flash from backup config.

(7) Install new software first.

(8) Reboot node.

Selection (1-8)? 4

qla_init_hw: CRBinit running ok: 8c633f

NIC FW version in flash: 5.4.9

qla_init_hw: CRBinit running ok: 8c633f

NIC FW version bundled: 5.4.51

qla_init_hw: CRBinit running ok: 8c633f

NIC FW version in flash: 5.4.9

Jul 14 16:28:53 [localhost:cf.nm.nicTransitionDown:warning]: HA interconnect: Link down on NIC 0.

Jul 14 16:28:53 [localhost:cf.rv.notConnected:error]: HA interconnect: Connection for 'cfo_rv' failed.

qla_init_hw: CRBinit running ok: 8c633f

NIC FW version bundled: 5.4.51

Module Type 10GBase-SR

Jul 14 16:29:00 [localhost:sas.cable.error:debug]: Failed to retrieve info of cable attached to SAS port "0a".

WAFL CPLEDGER is enabled. Checklist = 0x7ff841ff

add host 127.0.10.1: gateway 127.0.20.1

Zero disks, reset config and install a new file system?: Jul 14 16:29:02 [localhost:raid.autoPart.disabled:notice]: Auto-partitioning is disabled on this system: the system needs a minimum of 4 usable internal hard disks.

y

This will erase all the data on the disks, are you sure?: y

Rebooting to finish wipeconfig request.

Skipped backing up /var file system to CF.

Terminated

8.    Restart dan configure